Cecilia Langley Soda Machine November 14th, 2016 - 18:21:08
While you are able to get more profit and enjoying extra time through the usage of a soda maker you will also get to enjoy the fact that the drink can be prepared at all times within the day. The soda drinks that come bottled and available in stores are beaten by the ones made from soda machine courtesy of a new taste every time and ready to give a refreshing and sharper taste. The cost is much cheaper than what you have to part with for a bottled soda drink.
If you have a soda machine on your property and you pay for electricity to run that machine you could be spending a decent amount of money providing electricity to it at times that no one is around. The result is a significant amount of wasted money and energy over the course of a year. In some areas its costs over $500 per year to operate a soda machine. There are a few options to solving this challenge including: removing the lights (delamping) unplugging putting it on a timer and installing VendingMiser.
Vending Miser on the other hand eliminates the hassle of unplugging the machine and eliminates the concern about shutting down a machine during is refrigeration cycle. It has been proven to save a significant amount of energy in various locations. Vending Miser requires no modification to the existing vending machine and can be used almost all soda machines. Vending Miser simply plugs in line with the soda or vending machines energy cord and the outlet. It has a motion/occupancy sensor (Passive Infrared Device) mounted above the machine and if no one is around for 15 minutes the machine will turn off the machine. But before shutting the machine down Vending Miser determines if the machine is running a refrigeration cycle and will not shut down during a refrigeration cycle.
Removing the lights in a soda or vending machine reduces the visibility hurting sales and may only save $50 per year. By simply unplugging customers may approach the machine and find it out of operation so you have the added hassle of unplugging and plugging in daily. Timers can be installed to regulate the times that a vending machine has power but because timers may shut down a machine while its running through a refrigeration cycle. Shutting down a machine during one of these cycles may increase the amount of required maintenance.